How to box Willow - Fire Damage

When Willow requires to be shipped back to EEVE Atelier for repair after fire damage, Willow must be packed and boxed properly to avoid damages.

Is the original box and all supports still intact?

Yes → Go to step 2

No → Contact our Customer Support Team via info@eeve.com and a new empty box will be sent to you.

DO NOT ship Willow without all necessary supports and protection. When you do not have all the original supports and/or protection materials anymore, please request them from us. Do not use any other materials (foam, wrapping foils, bubble wrap, …)

Sending Willow in an unauthorized box or with missing supports will void your warranty!

To avoid spreading of the smell after a fire, you must place Willow in a large bag. Please report the fire damage to our customer support team, and we will provide a bag.

Step 1: Open the new box

Open the Brown Outer Box by using a small knife. Do not cut too deep or do not cut into the cardboard of the box.
Take out the 4 top supports
Open the white Inner Box, but do not take out of the Outer Box.
Take all supports and plastic bag out of the Inner Box

Step 2: Place Willow in the box

Place the Docking Station in de box
Place the Back Support over the Docking Station
Place the Front Support with the flat side on the bottom and sidewall of the Inner Box.
Place Willow in the plastic bag
Gently side Willow with a plastic bag
in the box

Step 3: Close the box

Close the Inner Box using 1 strip of tape
Place the protective corners on top of the box
Close the Outer Box using at least 3 strips of tape

If you have any questions regarding the shipping of Willow please contact our Customer Support Team at info@eeve.com