How to box Willow - Water Damage

When Toadi requires to be shipped back to EEVE Atelier for repair after water damage, Toadi must be packed and boxed properly to avoid damages.

 

Is the original box and all supports still intact?

Yes → Go to step 2

No → Contact our Customer Support Team via info@eeve.com and a new empty box will be sent to you.

DO NOT ship Willow without all necessary supports and protection. When you do not have all the original supports and/or protection materials anymore, please request them from us. Do not use any other materials (foam, wrapping foils, bubble wrap, …)

Sending Toadi in an unauthorized box or with missing supports will void your warranty!

To protect the structure of the packaging, you must place Willow in a large bag. Please report the water damage to our customer support team and we will provide a bag.

Step 1: Open the new box

  1. Open the Brown Outer Box by using a small knife. Do not cut too deep or do not cut into the cardboard of the box.

  2. Take out the 4 top supports

  3. Open the white Inner Box, but do not take out of the Outer Box.

  4. Take all supports and plastic bag out of the Inner Box

Step 2: Place Willow in the box

  1. Place the Docking Station in de box

  2. Place the Back Support over the Docking Station

  3. Place the Front Support with the flat side on the bottom and sidewall of the Inner Box.

  4. Place Willow in the large plastic bag

  5. Gently side Willow with plastic bag in the box

 

Step 3: Close the box

  1. Close the Inner Box using 1 strip of tape

  2. Place the protective corners on top of the box

  3. Close the Outer Box using at least 3 strips of tape

 

If you have any questions regarding the shipping of Willow please contact our Customer Support Team at info@eeve.com

© The Toadi Order BV - Confidential information